Multi-purpose test piece cutter / New JIS K7139 (Model SDL-200-1AJ)

/
/
Multi-purpose test piece cutter / New JIS K7139 (Model SDL-200-1AJ)
Loading...

Multi-purpose test piece cutter / New JIS K7139 (Model SDL-200-1AJ)

Plastics Multi-purpose test piece As specified in JIS K7139 and ISO-20753, the type A1 test piece directly molded by injection molding has a narrow parallel part length of [80±2 mm], so it can be cut into a type B2 test piece. It is desirable to prepare a test piece. Conventionally, it was necessary to prepare test pieces of various shapes according to the regulations of each test method, but the test piece shape has been unified with the multi-purpose test piece.

Add To Enquiry
Loading...

Description

Based on JIS K7139 and ISO-20753 standard, this device was developed and designed as a rational cutting device by combining our original product “Super Dumbbell® (replaceable blade method)” and technology and ideas with Idemitsu Petrochemical Co., Ltd. .

Features :

(1) Due to its compact design, it can be installed near the exit from the molding machine and can be cut instantly on the spot.

(2) There is no sprue or runner cutting (pretreatment).

(3) There are no burrs, etc. on the cut surface, and the cut surface is almost vertical and can be collected in extremely good condition.

Method of operation :

1) Set the injection-molded type A1 test piece on the moving table (Considering safety and workability, set the test piece on the front side.)

2) Move the moving table to the punching position and lower the lever to complete the work.

Compatible with various molded products

Left: For small rectangular plate/Right: For molding 4 prismatic test pieces

Specifications :

ModelSDL-200-1AJ High-performance multi-purpose lever-type cutting device
lever lever ratio 1:30
cutting stroke (Approx.) 0-16 mm
Work movement table sliding part LM linear guide 2 parallel installation and thrust bearing mechanism
Work moving table sliding stroke (Approx.) 230 mm (horizontal movement type)
work table size 120×215mm
lower limit adjustment Forced lower limit stopper
lever lock safety lever lock
Cutter used SSK-1002-D
Aircraft dimensions and weight (Approx.) (W) 280 x (D) 550 x (H) 640 mm (Approx.) 65 kg

 

Reference JIS K7139 Plastics – Multi-Purpose Specimen

Test method Referenced standards Specimen type, dimensions (mm)
Tensile test ISO527-2 A type or B type
Tensile creep test ISO899 A type or B type
bending test ISO178 80×10×4
Compression test ISO604 80×10×4
Impact strength (Charpy) ISO179 80×10×4
Impact strength (Izod) ISO180 80×10×4
Impact strength (tensile impact) ISO8256 80×10×4
Deflection temperature under load ISO75 (110 or 80) x 10 x 4
environmental stress cracking ISO4599,ISO4600 A type or B type, or 80×10×4
oxygen index ISO4589 80×10×4